Saturday, April 27, 2019
Energy efficient refurbishment of industrial buildings Literature review
power efficient refurbishment of industrial buildings - Literature review ExampleThis fact has important implications for capability habit as well as carbon dioxide emissions globally. An estimated 30% to 40% of all primary might workout stems from building operation along with a large potential to turn off carbon dioxide emissions (Colmenar-Santos et al., 2013, p.66). In a similar manner, former(a) research on the matter shows that buildings tend to consume 40% of the total energy world consumed globally along with 25% of the water and another 40% of other resources. Consequently, buildings are deemed creditworthy for about one third of all green house gas (GHG) emissions too (Katunsky et al., 2013, p.3). The rapid maltreat of industrialisation and the requirement for increased industrial buildings also tends to support the idea that building energy impost efficiency is a top priority issue. Projections on urbanisation depict that by 2050 around 67% of the global population will live in urban centres such that nations with the largest urban centres will display urbanisation rates of up to 86%. It would then be reasonable to expect that industrial buildings and their point for energy would only rise steeply with time (Adriaenssens et al., 2013, p.1945). The operation of buildings entails significant carbon dioxide emissions on floor of inefficient insulation, thaw and collecteding mechanism as well as lighting applications and the use of appliances. It is estimated that more(prenominal) energy efficient buildings have the potential to reduce carbon dioxide emissions by 3.7 giga tonnes every single stratum where the cost of one tonne of carbon dioxide emissions is an estimated 40 Euros (McKinsey, 2007, p.4). Other research also supports the idea that cut heating demands, greater emphasis on renewable energy sources and bolstered efficiency of supply chain mechanisms allows for a reduction in the energy demands to operate buildings (Colmenar-Santo s et al., 2013, p.66). Building heating requirements reappear repeatedly as a major consumer of energy and thus can be seen as impacting building energy usage significantly. In addition, building energy usage and its efficiency can be seen as dependant on other physical, climatic and human factors (Katunsky et al., 2013, p.3). While one perspective of aiming at the problem tends to define energy usage efficiency as a key problem, other research suggests that the use of energy to cool and heat building interiors is unjustified. The use of mechanical heating and cooling measures for thermal comfort are being questioned as valid means to maintain human thermal comfort levels in buildings (Susanti et al., 2011, p.211). This does not imply that energy usage in buildings is unjustified outright, especially for regions with severe heat or cold climates, and rather that energy usage is unjustified for places where the climate can support a lack of heating and cooling requirements. It must also be noted that greener buildings are beginning to create greater commercialised value, especially in terms of rent. Research indicates that commercial buildings with lower energy loads tend to ascendency more rent than comparable commercial buildings with higher energy demands (Eicholtz et al., 2009, p.1). This literature review will look into already conducted research to find out the major uses for energy in industrial buildings, the various methods to reduce the consumption of energy in industrial buildings and to discover any research gaps in existing literature. Dissecting aught Usage in Industrial Buildings In order to allow
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment